Pike

pike — Polar M600
Status	supported
Stars	3
Status details
Display	good
Touch	good
Bluetooth	bad
Haptics	good
Tilt to wake	good
Light sensor	unknown
Always-on display	good
Dual display	missing
Microphone	unknown
Speaker	missing
Compass	missing
Steps	good
Heart rate	good
USB	good
WLAN	bad
GPS	good
NFC	missing
Cellular	missing
Camera	missing
Crown	missing
Hands	missing

Pike (Polar M600) is a sport-focused watch with a unique square design. The port is currently limited by broken bluetooth, but most other features work.

Description

The polar M600 looks like an oversized FitBit, with a small square 240px screen and a massive Polar logo on the front, and a button at the bottom. The strap is made of a quality silicone and wraps around the entire body of the watch. While the strap is not at all standard, coloured replacements are available.

Repair

The watch can be opened as follows:

1. Remove the watch body from inside the strap
2. Undo 4 torx t5 screws on the back
3. Remove two pins from the ends of the watch body. Push these out with a thin tool in the direction indicated by back of the arrows. Push the pins out from the left if you have the watch facing away from you.

   make sure you replace these pins when reassembling. They are important for the structural rigidity of the watch. Reinsert them from the side you remove them, which will be the side indicated by front of the arrows.

Parts do not seem to be common.

Miscellaneous hardware docs

Keys

The button on the side of the watch is the power button The button on the front has an LED under it. Neither the button nor the LED are used under AsteroidOS.

Manually getting to fastboot

Hold the front button while pushing the side button to power on the watch. Continue holding the front button until a menu appears, navigate this with short and long presses of the side button.