Tetra hardware: Difference between revisions
No edit summary |
No edit summary |
||
Line 12: | Line 12: | ||
The shield with a QR code is covering the BCM43341 Bluetooth/WiFi chip. | The shield with a QR code is covering the BCM43341 Bluetooth/WiFi chip. | ||
The unmarked chip on the top left is most likely the bcmpmu (Broadcom Power Management Unit). | |||
=== Back === | === Back === | ||
The back of the PCB has testpoints, pogo pins and space for an unpopulated connector. | The back of the PCB has testpoints, pogo pins and space for an unpopulated connector. |
Revision as of 18:17, 10 August 2024
The tetra hardware is based on the Broadcom BCM23550 (referred to as java in the device tree) chipset.
Front
The front of the PCB is covered by a flexible PCB antenna used for NFC. This is connected to the PCB via a U.FL connector.
Removing the NFC antenna reveals the Broadcom SoC and on its left a shield on top of the memory.
The shield with a QR code is covering the BCM43341 Bluetooth/WiFi chip.
The unmarked chip on the top left is most likely the bcmpmu (Broadcom Power Management Unit).
Back
The back of the PCB has testpoints, pogo pins and space for an unpopulated connector.