Fresh/Wise/Lucky7

AidenIsik — Fri, 23 Oct 2026 19:29:59 GMT

← Older revision		Revision as of 19:29, 23 October 2026
(2 intermediate revisions by the same user not shown)
Line 181:		Line 181:
	'''NOTE: While Samsung disabled bootloader unlocking on their phones with the OneUI 8 (Android 16) update, they did not do so for their watches (as of 26/02/2026). All firmware versions of this watch can be unlocked.'''		'''NOTE: While Samsung disabled bootloader unlocking on their phones with the OneUI 8 (Android 16) update, they did not do so for their watches (as of 26/02/2026). All firmware versions of this watch can be unlocked.'''

	The bootloader of ~~the Galaxy Watch FE~~ can be unlocked using the following steps~~, with the buttons facing to the right~~:		The bootloader of this family of watches can be unlocked using the following steps:

	*Open settings.		*Open settings.
Line 188:		Line 188:
	* Locate the "OEM unlocking" option in the developer options menu, and switch it on.		* Locate the "OEM unlocking" option in the developer options menu, and switch it on.
	*Hold both buttons on the side of the watch until the Samsung logo appears with the "rebooting..." text below it.		*Hold both buttons on the side of the watch until the Samsung logo appears with the "rebooting..." text below it.
	*Quickly press the ~~upper~~ button three times to open the bootloader menu.		*Quickly press the red button three times to open the bootloader menu.
	*Use the ~~upper~~ button on the side of the watch to navigate to the "Bootloader unlock" option and select it. A short click moves to the next option and a long hold selects an option.		*Use the red button on the side of the watch to navigate to the "Bootloader unlock" option and select it. A short click moves to the next option and a long hold selects an option.
	* Press the ~~upper~~ button to unlock the bootloader.		* Press the red button to unlock the bootloader.
	*After rebooting, if you end up in the recovery, follow the steps presented to wipe the device's data.		*After rebooting, if you end up in the recovery, follow the steps presented to wipe the device's data.
	* Your bootloader is now unlocked.		* Your bootloader is now unlocked.

			== Flashing ==
			'''WARNING: Your bootloader must be unlocked before you can flash anything other than Samsung's official software.'''

			'''NOTE: No flashing software has been confirmed to work with Wireless Download Mode on these watches yet.'''

			These watches, much like Samsung phones, make use of Samsung's non-standard Odin Mode for flashing. There are two ways to use it: over [[Fresh/Wise/Lucky7#USB\|USB]], and over WiFi. The following steps will put your watch into Odin mode:

			* Hold both buttons on the side of the watch until the Samsung logo appears with the "rebooting..." text below it.
			* On OneUI 8 and above, press the non-red button three times in quick succession, or on OneUI 7 and below, press the red button three times in quick succession, in order to open the (engineering) bootloader menu.
			* Short press the red button to navigate to either Download (USB) or Download (Wireless), then hold the red button to select the highlighted option.

			Once in Odin mode, you can use [https://www.glassechidna.com.au/heimdall Heimdall] (over USB) to flash your watch.

	== Repair==		== Repair==
Line 253:		Line 266:

	/ {		/ {
	~~#address-cells = <0x02>;~~
	~~#size-cells = <0x01>;~~

	dpm: dpm {		dpm: dpm {
	};		};
Line 266:		Line 276:

	reserved_memory: reserved-memory {		reserved_memory: reserved-memory {
	~~#address-cells = <0x02>;~~
	~~#size-cells = <0x01>;~~
	~~ranges;~~

	dss_rmem: debug_snapshot {		dss_rmem: debug_snapshot {
	~~#address-cells = <0x02>;~~
	~~#size-cells = <0x01>;~~

	log_platform: log_platform {		log_platform: log_platform {
	};		};
Line 298:		Line 301:
	};		};
	</syntaxhighlight>		</syntaxhighlight>

			==== uniLoader ====
			Rather than trying to get the bootloader overlay to play nice with a mainline Linux device tree, we just ignore the stock device tree (on Lucky7) and provide our own with the shim second-stage bootloader [https://github.com/ivoszbg/uniLoader uniLoader].

Creating a Watchface

Mosen — Mon, 12 Oct 2026 14:49:34 GMT

Features of the local test script: add wfmix mention

← Older revision		Revision as of 14:49, 12 October 2026
Line 146:		Line 146:
	</pre>		</pre>
	The UI slider then acts as a controller to see how the watchface reacts to the different values. Note that the slider gives a real value from 0.0 to 1.0. To simulate the integer 0 to 100 provided by the real battery on the watch, we scale and convert to a fixed value in the code above.		The UI slider then acts as a controller to see how the watchface reacts to the different values. Note that the slider gives a real value from 0.0 to 1.0. To simulate the integer 0 to 100 provided by the real battery on the watch, we scale and convert to a fixed value in the code above.

			[https://github.com/pablogold87/wfmix-Watchface-Construction-Kit-for-AsteroidOS-Qt5- wfmix] by pablogold87 recreates this script's menu as a local web UI and lets you mix elements of existing community watchfaces into new ones. Give it a try if you like testing combinations to inspire your own work.

	= Share your watchface =		= Share your watchface =

AsteroidOS - Recent changes [en]

Fresh/Wise/Lucky7

Creating a Watchface