AsteroidOS - Recent changes [en]

SSH

Beroset — Wed, 02 Sep 2026 21:36:37 GMT

Root access via SSH

← Older revision		Revision as of 21:36, 2 September 2026
(One intermediate revision by the same user not shown)
Line 17:		Line 17:
	Once the setup is done, you can look for the IP address your Router assigned via DHCP, with		Once the setup is done, you can look for the IP address your Router assigned via DHCP, with
	<pre># ip a show dev wlan0</pre>.		<pre># ip a show dev wlan0</pre>.

			== Root access via SSH ==
			If you need to access root via ssh, there are two choices on the most recent builds. First is to use <code>sudo</code> after having logged in as the <code>ceres</code> user. The other option is to copy ssh keys as described in [[OpenEmbedded#A_word_about_root_access]]

	== Troubleshooting SSH ==		== Troubleshooting SSH ==

User talk:Monperrus

Beroset — Tue, 01 Sep 2026 12:56:32 GMT

Created page with "Hi! I rejected the edit to add asteroid-local-music but wanted to let you know why. The app looks interesting and useful, but it's not added to meta-asteroid-community yet. Also, there should probably be a way to have both the existing music app and the local one coexisting on the same watch."

New page

Hi! I rejected the edit to add asteroid-local-music but wanted to let you know why. The app looks interesting and useful, but it's not added to meta-asteroid-community yet. Also, there should probably be a way to have both the existing music app and the local one coexisting on the same watch.

Bluetooth

Monperrus — Sat, 29 Aug 2026 21:32:51 GMT

add A2DP audio playback

← Older revision		Revision as of 21:32, 29 August 2026
Line 138:		Line 138:
	[Gamepad.]#		[Gamepad.]#
	</pre>		</pre>

			=== A2DP audio playback ===

			Tested on the Huawei Watch 2 (`sawfish`) with a Bose NC 700 headset.

			AsteroidOS configures BlueZ for BLE-only operation by default. To use ordinary
			Bluetooth audio headsets, enable both BLE and BR/EDR:

			<syntaxhighlight lang="sh">
			sudo cp -a /etc/bluetooth/main.conf /etc/bluetooth/main.conf.before-a2dp
			sudo sed -i \
			's/^[[:space:]]ControllerMode[[:space:]]=[[:space:]]./ControllerMode = dual/' \
			/etc/bluetooth/main.conf
			sudo systemctl restart bluetooth.service
			</syntaxhighlight>

			Pair, trust and connect the headset using `bluetoothctl`. A successful A2DP
			connection lists `Audio Sink` in `bluetoothctl info HEADSET_ADDRESS`, and
			PulseAudio creates a sink named like
			`bluez_sink.HEADSET_ADDRESS_WITH_UNDERSCORES.a2dp_sink`.

			On current images, `module-stream-restore-nemo` can restore the `x-maemo`
			media role at `-20000` volume (silence). Fix its fallback rule:

			<syntaxhighlight lang="sh">
			sudo cp -a /etc/pulse/x-maemo-stream-restore.table \
			/etc/pulse/x-maemo-stream-restore.table.before-a2dp
			sudo sed -i \
			's/^sink-input-by-media-role:x-maemo[[:space:]]\+-20000$/sink-input-by-media-role:x-maemo 0/' \
			/etc/pulse/x-maemo-stream-restore.table
			</syntaxhighlight>

			Reload the module as user `ceres`:

			<syntaxhighlight lang="sh">
			pactl list short modules \| grep stream-restore-nemo
			pactl unload-module MODULE_ID
			pactl load-module module-stream-restore-nemo \
			restore_device=no restore_volume=yes restore_muted=no \
			route_table=/etc/pulse/x-maemo-route.table \
			fallback_table=/etc/pulse/x-maemo-stream-restore.table use_voice=false
			</syntaxhighlight>

			A previously stored stream setting can still set a new playback stream to 0%.
			While playback is active, inspect and fix it:

			<syntaxhighlight lang="sh">
			pactl list sink-inputs
			pactl set-sink-input-mute SINK_INPUT_ID 0
			pactl set-sink-input-volume SINK_INPUT_ID 100%
			</syntaxhighlight>

			Set the headset as the default output:

			<syntaxhighlight lang="sh">
			pactl set-default-sink bluez_sink.HEADSET_ADDRESS_WITH_UNDERSCORES.a2dp_sink
			pactl set-sink-mute bluez_sink.HEADSET_ADDRESS_WITH_UNDERSCORES.a2dp_sink 0
			pactl set-sink-volume bluez_sink.HEADSET_ADDRESS_WITH_UNDERSCORES.a2dp_sink 100%
			</syntaxhighlight>

			Test playback with a tone:

			<syntaxhighlight lang="sh">
			gst-launch-1.0 -q \
			audiotestsrc wave=sine freq=880 num-buffers=430 ! \
			audioconvert ! audioresample ! \
			pulsesink device=bluez_sink.HEADSET_ADDRESS_WITH_UNDERSCORES.a2dp_sink
			</syntaxhighlight>

Seluna/solios

Beroset — Sat, 29 Aug 2026 10:16:11 GMT

@@ Line 1: / Line 1: @@
 {{Watches
-|Name=seluna,solios
+|Name=seluna
 |Model=Google Pixel Watch 3
 |ReleaseDate=2024-09-10
@@ Line 6: / Line 7: @@
 |KernelVersion=5.15
 |AndroidVersion=16
 }}
 [[Category:Watches]]